American Crane & TRactor Parts Blog

The Parts You Don’t See: FMC Transmission Plates and Discs

A fresh coat of paint can make a rebuilt transmission look ready for work. It can’t, however, tell you much about what’s inside. For that, you have to go back to the workbench. Before the housing is closed and the transmission heads to the dyno. That’s where you’ll find the components responsible for putting power to work, including a stack of plates and discs with a bigger job than their appearance might suggest.


At ACTParts, we use FMC transmission plates and discs in our rebuilds. They’re parts our customers may never see, made by a manufacturer worth getting to know.

Meet FMC: Friction Is Their Specialty

FMC was established in the United Kingdom in 1991 to supply the earthmoving and mining equipment industries. Its reach has since expanded into other markets, but heavy equipment remains a part of the company’s foundation.


FMC manufactures and supplies wet-running friction products, with a range of materials that includes paper, bronze, graphite, carbon, and molybdenum. They also have a dedicated research and development for developing friction products for different applications. That range matters because friction components have to suit the conditions they’ll work in. The right material and manufacturing process depend on the application.

The company states that its products are manufactured to the same specifications as the original equipment manufacturer. For our rebuild shop, that’s an especially relevant standard when selecting the components going back inside a customer’s transmission.

Built to Engage

Set a transmission disc on the bench, and it doesn’t look particularly complicated. No moving parts of its own, nothing that suggests how much depends on it. Put it inside a working transmission, though, and the picture changes.


In a powershift transmission, friction discs and steel mating plates work together in clutch packs. Hydraulic pressure squeezes the stack together, allowing friction to transfer torque through the engaged clutch. Those engagements help deliver the speed and direction the operator needs.


Think about a wheel loader working a pile: forward into the material, reverse out, reposition, repeat. The transmission’s clutch packs have to engage and release throughout that cycle while handling load and heat. That makes the material, flatness, and surface finish of those components much more than just manufacturing details. They’re crucial to the transmission’s performance.

A Smooth Finish Isn’t Always the Right Finish

One of the more interesting details in FMC’s manufacturing process is something you might assume would be simple, finishing the steel surface. Shinier is surely better, right?


For these components, the goal is a controlled surface texture. FMC uses processes including abrasive belt finishing, tumbling, and rotary grinding to achieve the required finish. A controlled crosshatched or
linear texture helps support oil distribution and friction performance. FMC also inspects the finished
surfaces during production.


That might seem like a lot of attention paid to a surface that will eventually disappear inside a clutch
pack. But it’s a working surface, and how it interacts with its mating component matters every time the
clutch engages. The beauty really is in the details.

Keeping Steel in Shape

Speaking of details, flatness deserves the same attention. Cutting, machining, and stamping can
introduce or increase internal strength in steel. Left unaddressed, those stresses can contribute to
distortion when the component goes into service.


FMC describes using controlled heat treatment to relieve those stresses. During the process, parts are
stacked under a load to help achieve specified flatness tolerances. Furnace conditions, heating, and
cooling are carefully managed by the company’s metallurgists.

The Bond Has a Job, Too

For bonded friction discs, the friction material is only part of the story. Its attachment to the steel core
has to hold up as well.


FMC’s bonding process starts with preparing and cleaning the steel, followed by a controlled adhesive
application. The friction material is positioned, and heat, pressure, and time are used to create the
bond. That connection has to withstand repeated engagement, temperature changes, and the forces
generated as the disc works. Even a suitable friction material depends on a sound bond to do its job. It’s
another reason a disc’s simple appearance doesn’t tell the whole story.

FMC on Our Shelves and in Our Rebuilds

How flat a steel plate is and how it’s finished are decisions FMC makes long before the part reaches our
workbench. Those details are already built into the parts by the time we choose what goes into a
customer’s transmission. Which is exactly why we choose to use FMC plates and discs in the ACTParts
Rebuild Shop. The care they put into manufacturing those parts is the same care and attention to detail
we want going into the entire rebuild.


If you’re doing work in your own shop, we stock the same FMC plates and discs we use in our rebuilds.
Call ACTParts at 800.999.8538 and we’ll help you find the right parts or talk through you next
transmission rebuild.

Share:

Skip to content